Subscribe to Our Youtube Channel
Related Manuals for Vanco HDMX4K44
Summary of Contents for Vanco HDMX4K44
- Page 1 HDMI® 4x4 4K Matrix Selector Switch with HDR Vanco Part Number: HDMX4K44 Technical Support www.vanco1.com • techsupport@vanco1.com • 800-626-6445...
-
Page 2: Dear Customer
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. - Page 3 FEATURES The Vanco HDMX4K44 4x4 Ultra Compact Matrix Selector Switch with IR and RS-232, allows 4 HDMI sources to be distributed to up to 4 displays simultaneously. Have multiple sources displayed simultaneously on any display or have a single source split to multiple displays, flexibility for the perfect solution.
-
Page 4: Specifications
PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • HDMX4K44 4x4 HDMI Matrix • 12V/2,5A Power Adapter • (1) HDMI Matrix IR Remote • (1) RS-232 Cable •... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. LED Power indicator 2. Input Information Display 3. IR Sensor – receives IR signal from included remote 4. Power Button 5. Output selection buttons – Push output buttons to switch sources sequentially, the Input Information display will display what input is selected 6. - Page 6 The following table shows each combination based on the dip switch adjustments from left to right, see rear side of the HDMX4K44 for the EDID dip switches. Simply adjust to 0s and 1s for all four switches. To make and EDID adjustment, power off the HDMX4K44, adjust the dip switches, and then power on the unit for changes to take effect.
-
Page 7: Connect And Operate
3. OPTIONAL: Connect an RS-232 cable from the RS232 port on the matrix to a third party control system 4. Connect the included DC 12V Locking power supply 5. Power up the HDMX4K44 and then the components connected REMOTE CONTROL 1. - Page 8 PC CONTROLLER USER GUIDE The HDMX4K44 includes software that can be used for firmware updates, adjust EDID, and even switch the unit using an RS-232 connection to a PC or computer. Software for the HDMX4K44 can be found on the product webpage on www.vanco1.com, and requires the included DB9 RS-232 connection to connect from a PC or computer to the matrix.
-
Page 9: General Tab
GENERAL TAB This tab allows for customization of the matrix unit including disabling the beeping noise when switching, as well as functions to reboot and powering on/off unit. 1. Select the RS-232 COM port (This can be found within your computer’s Device Manager) 2. - Page 10 EDID TAB There are three ways to adjust EDID within this tab: manually set EDID, Copy EDID from either input or output, and selecting an EDID file to load. 1. Manually selecting EDID – Select from a default list to apply to any input, then click on “Set” to set EDID 2.
-
Page 11: Matrix Tab
MATRIX TAB In addition to control the switching of the unit manually by front panel operation, and IR, using the included remote, this tab allows for switching via RS-232 from a PC or computer. 1. Status – shows which input is selected for each output 2. -
Page 12: Upgrade Tab
UPGRADE TAB This allows for any firmware update available on www.vanco1.com, under the “Product Downloads” tab. Vanco will release firmware updates as needed to correct any issues, or add any additional features. Download and save the firmware update file onto a PC or computer. - Page 13 NOTICE Vanco HDMI and Cat5e/6 cables are strongly recommended for use with this product to ensure best results. Incorrect placement of IR Transmitter and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.
-
Page 14: Troubleshooting
4. If you are still encountering issues, attempt the “hot-plug” concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 15: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 16 Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the HDMX4K44 and is the answer not in the manual?
Questions and answers