Related Manuals for Vanco Evolution EVSW41KVM
Summary of Contents for Vanco Evolution EVSW41KVM
- Page 1 4K 4x1 HDMI® Switch with Quad- View and KVM USB Control Vanco Part Number EVSW41KVM 4x1 HDMI® Switch with Quad-View and KVM USB Control www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
-
Page 3: Package Contents
INTRODUCTION The Evolution by Vanco EVSW41KVM HDMI switcher allows four HDMI inputs to be viewed one at a time, or simultaneously on one display. Also features a built in USB switcher, which allows one keyboard and/or mouse to be switched to any of the USB outputs which are paired with the HDMI inputs. -
Page 4: Specifications
SPECIFICATIONS Signal Inputs/Output ........... HDMI 1.3a and USB 2.0 Maximum Single Link Range ........1920x1080/60Hz HDMI Input/Output Connector ........Type A 19 pin Vertical Frequency Range..........50/60Hz Video Amplifier Bandwidth .......... 2.25 Gbps Input Resolution ............480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/ 60Hz,1080i50/60Hz,1080p24/25/30/50/60Hz Output Resolution ............720p,1080p Dimensions ............... -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. Update function select switch – reserved for firmware updates Normal : Default setting and normal operation mode Up_1: Upgrade data for MCU_1 via RS232 Up_2: Upgrade data for MCU_2 via RS232 2. IR sensor – used to receive IR commands from included remote control 3. - Page 6 IR REMOTE Power on/off, reset to default settings “H/S” button will adjust Select each individual input to resolution to scale to 1080p, or display one at a time, or select downscale to 720p. Multi-View to view all four sources on one display When in Multi-View mode, select which source to output audio;...
- Page 7 Sync Mode (Through button): With this mode activated, all sources with USB connection can be controlled simply by moving the mouse cursor to the respective screen the source is displaying on. With the mouse cursor on that screen, USB control for keyboard and/or mouse will be active for that source. 800.626.6445...
- Page 8 HOT KEY FUNCTIONS AND CONTROL The “HOTKEY” commands and functions are shortcuts for an easy way to control the functions of the EVSW41KVM directly on the connected keyboard! Commands and Functions Command Function Mouse HOTKEY [wheel key] + [wheel key] 1.At 4IN1 mode,switch to full screen mode 2.At full screen mode,Switch to 4IN1 mode Keyboard HOTKEY*...
-
Page 9: Connection Diagram
CONNECTION DIAGRAM Printer Source Source Bluetooth Source Source HDTV CONNECT AND OPERATE 1. Connect HDMI source(s) such as a computer or security NVR 2. Connect USB 2.0 Type B cables to the switcher, and then connect to the corresponding sources 3. -
Page 10: Troubleshooting
4. If you are still encountering issues, attempt the “hot-plug” concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the Evolution EVSW41KVM and is the answer not in the manual?
Questions and answers