Remaining Track; Units Set-Up; Distance Unit; Speed Units - AvMap EKP III C User Manual

14.4.4 REMAINING TRACK

The remaining track memory is displayed on the Track Setup Menu page. The number dis-
played will be points, time, or distance based on the recording step selection.

14.5 UNITS SET-UP

This sub-menu contains the various options that define how the EKP-III displays units of
measurement.
>'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER'

14.5.1 DISTANCE UNIT

>'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER' + "DIS-
TANCE" + 'ENTER'
Distance measurements can be displayed in Statute Miles (SM), Nautical Miles (NM) or kilo-
meters (KM). The default setting is NM.

14.5.2 SPEED UNITS

>'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER' +
"SPEED" + 'ENTER'
Speed measurements can be displayed in miles per hour (MPH), Knots (KTS) or kilometers per
hour (KMH). The default setting is Knots.

14.5.3 ALTITUDE UNIT

>'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER' +
"ALTITUDE" + 'ENTER'
Altitude measurements can be displayed in Feet (FT), Meters (MT) or Flight Levels (FL). The
default setting is Feet.

14.5.4 DEPTH UNIT

>'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "UNITS SETUP" + 'ENTER' +
"DEPTH" + 'ENTER'
Depth measurements can be displayed in Feet (FT), Fathoms (FM) or Meters (MT). The default
setting is Feet.
EKP III USER MANUAL
91