Track Recording Step; Clear Track; Remaining Track; Units Set-Up - AvMap GeoPilot Plus User Manual

14.4.5 track recording Step

The GEOPILOT stores many thousand of points data points to display a pattern of aircraft movement
(Track). After many thousand of points intervals the oldest is deleted with each new position fix
point. The following options assist in getting the most track memory for your type of flying.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "TRACK SETUP" + 'ENT' + "TRACK
RECORDING STEP" + 'ENT'
Distance - will store a fix point at the specified interval of distance.
time - will store a fix point at the specified interval of: 5 sec, 30 sec, 1 min.
Auto - this allows for the most efficient use of the memory as the software will determine when to
store a fix point based on straight and curved flight paths.
The default setting is Auto.

14.4.6 Clear track

Deletes all of the Track history and begins new.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "TRACK SETUP" + 'ENT' + "CLEAR
TRACK" + 'ENT'
After pressing 'ENT' a window appears; press 'ENT' to confirm deletion or 'ESC' to abort function.
The message "DONE" will appear confirming the action.

14.4.7 remaining track

The remaining track memory is displayed on the Track Setup Menu page. The number displayed
will be points, time, or distance based on the recording step selection.

14.5 UNItS SEt-UP

This sub-menu contains the various options that define how the GEOPILOT displays units of
measurement.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "UNITS SETUP" + 'ENT'

14.5.1 Distance Unit

> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "UNITS SETUP" + 'ENT' + "DISTANCE"
+ 'ENT'
Distance measurements can be displayed in Statute Miles (SM), Nautical Miles (NM) or kilometers
(KM). The default setting is NM.

14.5.2 Speed Units

> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENT' + "UNITS SETUP" + 'ENT' + "SPEED"
+ 'ENT'
Speed measurements can be displayed in miles per hour (MPH), Knots (KTS) or kilometers per hour
(KMH). The default setting is Knots.
71