Reverse A Flight Paln; Goto Flight Plans; Goto - Database Mode; Goto - Moving Map Mode - AvMap EKP III C User Manual

'MENU' 1 sec. + "FLIGHT PLAN" + 'ENTER' + 'MENU' + "CLEAR FP" + 'ENTER'
A Warning window will appear to confirm deletion: press 'ENTER' to confirm,
'ESC' to abort.

6.6 REVERSE A FLIGHT PALN

The Flight Plans stored in the EKP-III memory can be automatically reversed by:
>'MENU' 1 sec. + "FLIGHT PLAN" + 'ENTER' + 'MENU' + "REVERSE FP" + 'ENTER'
The message "DONE" will appear to the right of the menu selection and the sequence
of the Waypoints change immediately on the screen.

6.7 GOTO FLIGHT PLANS

A GoTo Flight Plan is a one leg direct Flight Plan to a specified Database object or cursor posi-
tion on the Moving Map.

6.7.1 GOTO - DATABASE MODE

To activate a GoTo Flight Plan within a Database page (see Chapter 8) press 'GOTO'. Doing
this will deactivate the current Flight Plan and redraw the screen to the Moving Map page. All
navigation information is now related to this object.
To Deactivate the GoTo Flight Plan, from the Moving Map screen press 'GOTO'. A
GoTo Menu box will appear with the option to deactivate. Pressing "DEACTIVATE FP" will
cancel the navigation data and place the EKP-III in a Plotter Mode without an active Flight Plan.
If a Flight Plan was active prior to the GOTO, the Flight Plan will resume as active.

6.7.2 GOTO - MOVING MAP MODE

To activate a GoTo Flight Plan from the Moving Map, press 'GOTO'. A "GoTo" Menu box
will appear on the screen. You can select the current cursor position or select a Database
object category. When selecting the Database category, the Database menu will appear (see
Chapter 8 for details on searching the Database Menu). Once the desired object has been
found, press 'GOTO' to activate.
NOTE
'GOTO' creates a temporary Flight Plan that is not stored in the EKP-III memory.
52
EKP III USER MANUAL