Table of Contents
Advertisement
6
Flight Plan
>'MENU' 1 sec + "FLIGHT PLAN" + 'ENTER'
The Flight Plan mode allows you to create a Flight Plan with User Points, Temporary
Waypoints or Jeppesen object as Waypoints. Flight Plans can be entered on the Moving Map
(see Par. 3.6.6) or in the Flight Plan Menu if all Waypoints are known objects. The EKP-III can
store up to 10 Flight Plans with up to 100 individual legs each. Additional Flight Plans can be
stored via the User C-CARD (see Chapter 8).
The Flight Plan Menu page provides the BRG, DST, ETA and Fuel data for the
active/viewed Flight Plan. By using the left/right cursor keys it is possible to change the table
columns displayed, choosing between BRG, DST, ETA and DST, ETA, Fuel.
The Flight Plan Menu is where you can edit, view and activate Flight Plans. To open
the Flight Plan Menu press 'MENU' from the Flight Plan page.
See section 3.4.6 regarding Flight Plan creation from the moving map page.
EKP III USER MANUAL
Fig. 6 - Flight Plan page with Flight Plan menu box open
49
Advertisement
Table of Contents
