Installation Orientation; Accessories; Installing The Self-Contained Servo-Hydraulic Linear Axis; Preparing The Installation - Bosch Rexroth SHA Series Operating Instructions Manual

Self-contained servo-hydraulic linear axis
Table of Contents

Advertisement

Operating Instructions
Self-contained servo-hydraulic linear axis Type SHA...
7.4

Installation orientation

7.5

Accessories

7.6

Installing the self-contained servo-hydraulic linear axis

7.6.1

Preparing the installation

7.6.2

Mechanical mounting

Information about the drive unit can be found in the installa‐
tion drawing.
Information about the installation orientation of the drive con‐
troller is contained in the project planning manual, see
ter 1.2
page
5.
Regarding accessories, please contact Bosch Rexroth Service for
clarification; for the address see
port" on page
1. Check the scope of delivery for completeness and damage in transit.
2. Compare the material number with the details in the order confirmation.
If the material numbers or denominations of the self-contained
servo-hydraulic linear axis and of the drive controller do not corre‐
spond to those given in the order confirmation, contact Bosch
Rexroth Service for clarification; for the address, see
16.1 "Service and support" on page
WARNING
Completely mount the self-contained servo-hydraulic linear axis accord‐
ing to the mounting specifications using suitable mounting aids.
WARNING
Keep the self-contained servo-hydraulic linear axis in a stable and se‐
cured position until it is firmly mounted to the mounting face provided at
the customer's end.
Be careful when installing the unit.
Bosch Rexroth AG
"Required and supplementary documentation" on
chapter 16.1 "Service and sup‐
87.
87.
Improper mounting!
Insufficient fixation or insufficient stability may
cause the self-contained servo-hydraulic line‐
ar axis to become loose and fall down.
Consequently, hydraulic fluid may leak and
lead to personal injuries and/or damage to
property. Self-contained servo-hydraulic line‐
ar axes of heavy weight may bruise or strike
persons dead.
Accidental movement of the self-contained
servo-hydraulic linear axis while it is being in‐
stalled!
Risk of injury! Danger of crushing! Damage to
property!
33/91
Installation
chap‐
chapter

Advertisement

Table of Contents
loading

Table of Contents