Table of Contents
Advertisement
PAGE 15
Installation Instructions (Continued)
Before Installation
Before Installation
SUPPLIED PARTS
Parts supplied
Parts supplied
Mounting brackets (4)
Mounting brackets (4)
Wire clamps (2)
Wire clamps (2)
(for drain hose coupling)
(for drain hose coupling)
Installing Your Dishwasher
Drain hose coupling (1)
Drain hose coupling (1)
Prepare the cavity
PREPARE THE CAVITY
The cavity will need to conform to the dimensions in the diagram.
The cavity will need to conform to the dimensions in the diagram.
The water supply and power point for the appliance cannot be in the dishwasher cavity.
The water supply and power point for the appliance cannot be in the dishwasher cavity.
Ideally they should be in an adjacent cavity, easily accessed for isolating the product.
Ideally they should be in an adjacent cavity, easily accessed for isolating the product.
An opening to allow the hoses and power cord to exit is required on either side of the
An opening to allow the hoses and power cord to exit is required on either side of the cavity with
cavity with the minimum dimensions shown.
the minimum dimensions shown.
Drain hose support (1)
Drain hose support (1)
Screws (8)
Screws (8)
Prepare the dishwasher
Drawer dishwashers are unstable until they are secured to their surrounding cabinetry.
Wire clamps (2)
(for drain hose coupling)
Drain hose coupling (1)
Ensure that the inner end of
Ensure that the inner end of
Drain hose support (1)
the tab is protruding by one
the tab is protruding by one
material thickness
material thickness
Screws (8)
Hose clamp (1)
Hose clamp (1)
(for sink waste connection)
(for sink waste connection)
Moisture protection tape (1)
Moisture protection tape (1)
Kick plate brackets (2)
Kick plate brackets (2)
(For installing kick plate)
(For installing kick plate)
90 °
Electrical, drain
Electrical, drain
and water supply
and water supply
min. 820 mm
min. 820 mm
line entrances
line entrances
29
29
Space between cabinet
Space between cabinet
bottom and floor
bottom and floor
min. 600 mm
Parts supplied
Hose clamp (1)
(for sink waste connection)
INALTO.HOUSE
Mounting brackets (4)
Moisture protection tape (1)
Wire clamps (2)
(for drain hose coupling)
Kick plate brackets (2)
(For installing kick plate)
Drain hose coupling (1)
29
Drain hose support (1)
90 °
80
80
100
100
Screws (8)
Ens
the
ma
Ho
(for
Mo
K
(F
29
Advertisement
Table of Contents
