Inalto IDWD60DS User Manual page 19

Hide thumbs Also See for IDWD60DS:
Table of Contents

Advertisement

Electrical Shock Hazard
WARNING
Disconnect electrical power before
READ ALL INSTRUCTIONS BEFORE USE
installing dishwasher.
It is your responsibility to use caution when installing
Failure to do so could result in death or
maintaining, and operating your dishwasher.
PAGE 19
electrical shock.
We will not be liable for any damage resulting from
improper use.
Attention
This is the safety alert symbol. This symbol alerts you to
Installation Instructions (Continued)
potential hazards that can result in property damage or
The installation of the pipes and electrical equipments should be done by professionals.
serious bodily harm, even death.
The dishwasher requires a 220 -240 Volt 50 Hz AC supply through a 10 amp rated
The safety alert symbol will be followed by either the
power outlet.
word "WARNING" or "CAUTION" then an important
ELECTRICAL REQUIREMENTS
safety message. These words mean:
Ensure that the supply is properly earthed.
WARNING
Indicates the possibility of serious
Cold Water Connection
Disconnect electrical power before installing dishwasher.
bodily harm or death.
Failure to do so could result in death or electrical shock.
CAUTION
Indicates the possibility of injury or
ATTENTION!
damage to property.
Cold water connection
The installation of the pipes and electrical equipments should be done by professionals.
The dishwasher requires a 220 -240 Volt 50 Hz AC supply through a 10 amp rated power
The Inlet Hose supplied requires a
Basic Safety Precautions
outlet. Ensure that the supply is properly earthed.
washer.
This appliance is intended to be used in household
COLD WATER CONNECTION
A faucet is important for isolating the supply to the dishwasher.
The Inlet Hose supplied requires a 3/4 inch BSP Male fitting, suitable for a flat sealing washer. A
and similar applications such as:
Ensure that the sealing washer supplied inside the hose connection is firmly in place.
faucet is important for isolating the supply to the dishwasher. Ensure that the sealing washer
- staff kitchen areas in shops, offices and other
Check that the initial water is clean, particularly if the supply has not been used for
supplied inside the hose connection is firmly in place. Check that the initial water is clean,
working environments;
some time.
particularly if the supply has not been used for some time.
- farm houses;
3/4
inch BSP Male fitting, suitable for a flat sealing
5
3/4 BSP thread
Rubber sealing washer
Drainage pipe
34
,
INALTO.HOUSE
Back of dishwasher
Inlet pipe
Power cable

Advertisement

Table of Contents
loading

Table of Contents