Table of Contents
Advertisement
PAGE 9
Installation Instructions
WARNING! Electrical shock hazard
Disconnect electrical power before installing the dishwasher. Failure to do so could result in death or electrical
shock.
Important! The installation of the dishwasher, plumbing and electrical outlets should be completed by licenced
tradespeople.
POWER CONNECTION
WARNING! For personal safety:
•
Do not use an extension cord, powerboard or a power adapter with the dishwasher. It should be connected
directly into a power socket.
•
Do not under any circumstances, cut or remove the earthing connection from the power cord.
ELECTRICAL REQUIREMENTS
Please refer to the rating label on the dishwasher, to find out the rated voltage and ensure that the dishwasher is
connected to the appropriate power supply. Use the required 10 Amp fuse and it should be connected to its own
dedicated circuit serving only this appliance.
ELECTRICAL CONNECTION
Ensure the voltage and frequency of the power corresponds to that noted on the dishwasher's appliance rating
plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical socket to which the
appliance must be connected is not appropriate for the plug, have a licenced electrician replace the socket- do
not use a power adapter as this can lead to overheating.
POSITIONING THE DISHWASHER
Important! Ensure that the dishwasher is properly earthed before use.
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along
the adjacent cabinets or walls. The dishwasher is equipped with both a water supply hose and drain hose that can
be positioned either to the right or the left sides to facilitate proper installation.
Ensure that your selected location has an accessible power-point (power outlet) which the dishwasher's power
cord can reach without strain. If there isn't a suitable power point (power outlet) located nearby, please engage a
licensed electrician to install a new power socket. Do not use extension leads, power boards or adapters.
LEVELLING THE DISHWASHER
Once the dishwasher is positioned in your desired location, the height and level of the dishwasher can be altered
by adjustment of the screwing legs/feet. In any situation, the appliance must not be inclined more than 20º, as
this will affect its operation and performance.
Figure 4. Screwing the dishwasher legs/feet clockwise or anti-clockwise to adjust its level.
INALTO.HOUSE
Hide quick links:
Advertisement
Table of Contents
