Table of Contents
Advertisement
Troubleshooting (Continued)
Problem
Wash items are not
fully dry
Glassware developing
cloudy stains and
calcium rings
Wash items showing
signs of rust
Tub becoming dull
in color
Traces of detergent in
the tub
Foam in the wash tub
Possible Causes
Unloading dishwasher
too soon.
Insufficient Rinse Aid.
Rinse Aid setting too low.
Insufficient Rinse Aid
being dispensed.
Items are unsuitable for
dishwasher use.
Tub requires rejuvenation.
Incomplete/interrupted
wash cycle.
Non electric dishwasher
detergent used.
Spilt Rinse Aid present.
What To Do
The drying cycle must be complete
before the dishwasher is unloaded.
Check the Display for end time.
Check for Low Rinse Aid Level
warning and re fill if necessary.
Increase Rinse Aid setting as per
instructions on page 20
Adjust the Rinse Aid Dispenser as
per the instructions on page 20
Discontinue washing such items in
the dishwasher.
Dose the tub with specific Stainless
Steel Tub /Bowl Cleaner.
Rerun wash program to ensure
wash load is not contaminated
with detergent.
Use correct detergent.
Repeat the Rinse Program until clear.
PAGE 28
Advertisement
Table of Contents
