Table of Contents
Advertisement
Installation Instructions (Continued)
Connection Of The Drain Hose
There are two recommended options for connecting the drain hose.
CONNECTION OF THE DRAIN HOSE
Option A: Connecting to the sink waste
There are two recommended options for connecting the drain hose.
This is the typical modern method.
Option A: Connecting to the sink waste (This is the typical modern method.)
Check if your sink waste pipe has provision for this method.
Check if your sink waste pipe has provision for this method.
Beware if it has the drain hose spigot that has never been used, it will likely be blanked off
Beware if it has the drain hose spigot that has never been used, it will likely be blanked
inside the spigot.
off inside the spigot.
This will need careful drilling /cutting out to make it operational. Ensure that the opening you
This will need careful drilling /cutting out to make it operational. Ensure that the
make has no ragged edges that will likely lead to debris snagging over time and causing a
blockage.
opening you make has no ragged edges that will likely lead to debris snagging over
First cut off the head of the drain hose. When inserting the hoses into the Y piece, wet the hose
time and causing a blockage.
ends for ease of insertion. Insert fully. Use the hose support clip provided, install as per the
First cut off the head of the drain hose.When inserting the hoses into the Y piece,
illustration. Insure that the hoses have a straight run from the clip to the connection to the
waste pipe.
wet the hose ends for ease of insertion. Insert fully. Use the hose support clip provided,
install as per the illustration. Insure that the hoses have a straight run from the clip to
the connection to the waste pipe.
Cut off the head of the drain hose
Drain hose
support cup
Cold water supply
with faucet
35
Drain hoses must not
loop downwards
PAGE 20
Advertisement
Table of Contents
