Fan Connector (Cpufan, Chsfan); Wake-Up On Lan (Wol) - QDI KinetiZ 7A Manual

Installation Instruction

Fan Connector (CPUFAN, CHSFAN)

The fan speed of these two fans can be detected and viewed in "PC Health Status" section
of the BIOS. They will be automatically turned off after the system enters suspend mode.
CPUFAN
CHSFAN

Wake-Up On LAN (WOL)

Through the Wake-Up On LAN function, a wake event occurring fr om the network can
wake up the system. If this function is to be used, pleas e be s ure an ATX 2.01 power
supply of which 5VSB line is capable of delivering 720mA, and a LAN adapter which
supports this function are used. Then connect this header to the relevant connector on the
LAN adapter, set "Wake Up On LAN/Ring" as Enabl e d in the "POWER MANAGEMENT SETUP"
section of the BIOS. Save & exit, then boot the operating sys tem once to make sure this
function takes effect.
Manual for KinetiZ 7A