Flame Selection - Caple C886G Instruction Manual

F L A M E S E L E C T I O N
Once the burners are adjusted correctly, the flames should be light blue, and the inner cone should
be clearly visible. The size of flame depends on the position of the related burner control knob.
Burner ON, large flame Burner ON, small flame Burner OFF
F I G. 8
See fig.8 for various operating options (flame size selection); the burner should be set at a large
flame during the initial phase of cooking to bring the food to boiling, and then the knob should be
turned to the small flame position to maintain the cooking. It is also possible to adjust the flame
size in smaller adjustments.
I M P O R TA N T
It is prohibited to adjust the flame in the range between the Burner OFF and Burner ON large
flame positions.
Significant quantities of energy can be saved if the appliance is used correctly, parameters set
correctly, and appropriate cookware is used. The savings can be as follows:
› Up to 60 per cent savings when proper pots are used.
› Up to 60 per cent savings when the unit is operated correctly and the suitable flame size
is chosen.
› Significant energy savings when lids are used on pans.
It is a prerequisite for efficient and energy-saving operation of the hob that the burners are kept
clean at all times (in particular the flame slots and injectors).
Instruction manual C886G, C887G & C889G 23
Please keep this instruction manual for future reference