Troubleshooting - Caple C886G Instruction Manual

T R O U B L E S H O O T I N G
It may occur that the hob does not function or does not function properly. Before calling Caple
service for assistance, please read the following information:
First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in
particular, that the gas valves for the mains are open.
The burner does not light or the flame is not complete around the burner, check if;
› The gas holes on the burner are not clogged;
› All of the movable parts that make up the burner are mounted correctly;
› There are no draughts around the cooking surface.
The flame does not stay lit, check if;
› You press the knob all the way in.
› You keep the knob pressed in long enough to activate the safety device.
› The gas holes are not clogged in the area corresponding to the safety device.
The burner does not remain on when set to 'LOW', check if;
› The gas holes are not clogged.
› There are no draughts around the cooking surface.
› The valve has been adjusted correctly (see 'Valve adjustment').
The cookware is not stable, check if;
› The bottom of the cookware is perfectly flat.
› The cookware is centered correctly on the burner.
› The support grids have not been inverted
Instruction manual C886G, C887G & C889G 13
Please keep this instruction manual for future reference