Care And Maintenance - Caple C886G Instruction Manual

C A R E A N D M A I N T E N A N C E
Before cleaning or performing maintenance on your appliance, disconnect it from the electrical
power supply.
› To extend the life of the hob, it is absolutely indispensable that it be cleaned carefully and
thoroughly on a frequent basis, keeping in mind the following:
› The enameled parts must be washed with warm water without using abrasive powders or
corrosive substances which could ruin them;
› The removable parts of the burners should be washed frequently with warm water and soap,
making sure to remove caked-on substances;
› The end of the electronic ignition device must be cleaned carefully and frequently, making sure
that the gas holes are not clogged;
› Stainless steel can be stained if it remains in contact with highly calcareous water or
aggressive detergents (containing phosphorous) for an extended period of time, it is
recommended that these parts be rinsed thoroughly with water and then dried well, It is also a
good idea to clean up any spills;
G R E A S I N G T H E G A S VA LV E S :
Over time, the gas valves may stick or become difficult to turn. If this is the case, they must be
cleaned on the inside and the re-greased.
N OT E :
This procedure must be performed by a Caple approved engineer or similar qualified persons.
Please keep this instruction manual for future reference
Instruction manual C886G, C887G & C889G 11