Change Of Password; Figure 11 Calibration Correction Window; Figure 12 Change Password Window - Michell Instruments Optidew User Manual

Optidew Series User's Manual
Once all necessary data has been entered in the Calibration Correction window, click
on the
Use Calibration Date to Correct Measure Values
on and
Apply
update, the corrections entered will be applied to all displayed and logged data, and
a legend above the display will indicate this fact. To remove the Calibration Correction
window, de-select the check box, click on
NOTE: Enter the calibration data in descending order so the highest values
are in row 1 as shown above.
3.4.9

Change of Password

The initial password is
Calibration Data windows. Selecting the
following window where you can enter a new password with up to 20 alphanumeric
characters. The password is not case sensitive.
Michell Instruments
to return to the main Virtual Hygrometer display. Upon the next
Close
Calibration Correction Window
Figure 11
. This can be changed after entering the Control and
Michell
Figure 12
, then click on
Apply
Change Password
Change Password Window
OPERATION
check box and then click
.
Close
menu item will display the
25