modway MOD-5357 Manual page 6

CONNECTING BED FRAME TO HEADBOARD
STEP 1:
Line up the Bed Frame (2) board's pre-drilled holes to match those of the Headboard (1).
Secure the Headboard (1) to the Bed Frame (2) by using 2 pieces of Bolt (B) with 2 pieces of Spring Washer (D), 2 pieces
of Flat Washer (C) into the Bed Frame (2).
Then tighten the Bolts (B) by using the Allen Wrench (F).
Repeat the same procedure for each bolt and each side of the Bed Frame (2).
2
2
1
1
C
D
B
F
Bx4 Cx4 Dx4 Fx1
Hardware & Tool required
STEP 2:
Carefully position the assembled bed to the desired location by four adults.
Assembly is completed. The bed is ready to use now!
NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
Customer Service 908-368-1025︱ Page 6 of 6