Page 1
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD Thank you for purchasing the MODWAY HEADBOARD! Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
Page 2
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD 2. Attach by using Arc Washer (B) and Bolt (A) from the holes on the back of Low Post (2) and Headboard (1). 3. Use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure at this step.
Page 3
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD OPTION 1 Option 1 Hardware: Bolt M6x45mm Bolt M6x65mm Flat Washer M6 Spring Washer M6 Nut M6 Allen Wrench Spanner Wrench Components: 1. Headboard 2. Bed frame Note: Extra hardware were provided for attaching the headboard to your Bed Frame (use is optional).
Page 4
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD fit 1 piece of Flat Washer (C) and Nut (E) on the bolt as it protrudes through the Bed Frame (2) and the Headboard (1) as shown. 4. Repeat the same procedure for each bolt and each side of the Bed Frame (2).
Page 5
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD Note: This is assembly instruction for Headboard connect to MODWAY Bed Frame. Option 2 Hardware: Bolt M6x45mm Bolt M6x65mm Flat Washer M6 Spring Washer M6 Allen Wrench Components: 1.
Page 6
MOD-6168/ 6169/ 6170/ 6171/ 6172/ 6173/ 6174/ 6175/6176/ 6177/ 6178/ 6179 HEADBOARD STEP 2: Carefully position the assembled bed to the desired location by four adults. Assembly is completed. The bed is ready to use now! NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
This manual is also suitable for:
Mod-6169Mod-6170Mod-6171Mod-6172Mod-6173Mod-6174...
Show all
Need help?
Do you have a question about the MOD-6168 and is the answer not in the manual?
Questions and answers