modway MOD-5357 Manual page 3

BED FRAME
STEP 3:
Attach 1 piece of Support Leg (4) into the Center Rail (3) as shown.
Secure the Support Leg (4) into the Center Rail (3) by using 2 pieces of Screw (C) as shown.
Tighten the Screws (C) with Phillips Head Screw Driver (Not provided).
4
Phillips Head Screw
Cx4
Driver( not provided)
STEP 4:
Place the assembled Center Rails (3) to the Short Board(1).
Insert the hook on the each end of Center Rail(3) into the notch on the Short Board (1).
1
2
Customer Service 908-368-1025︱
3
4
2
3
1
3
C
C
4
Hardware & Tool required
Notch on the
Short Board
1
Hooks on the
end of Center Rail
Page 3 of 6
3