Table of Contents
Advertisement
BAMO A1, A2 60-500A
General Information
The battery motor controller BAMO-Ax-xx forms together with the low voltage DC-motor a
propulsion unit distingushed by its high control range.
With a DC-motor the current is proportional to the torque and the voltage is proportional
to the speed.
Current and voltage are measured precisely.
The analogue circuits of the servo driveare simply constructed.
The speed actual value is generated from armature voltage or from the
DC-tachogenerator.
The speed and the current controller are disigned as P-I-controller.
In version BAMO-A2 (4Q) the brake energy is refeeded to the battery.
Application
for all kinds of machines or vehicles up to 40kW battery feeded drive power
especially for
- a great controller range
- a high efficiency
- small motor dimensions
- a even and smooth travel
for speed or torque regulation or
combined speed-torque regulation with or without superposed position controller.
For use in
battery powered vehicles like cleaning machines, el. boats,
fork-lift trucks, transport systems,
Solar- or wind powered installations,
and many other battery powered machines and installations.
Construction:
Cubicle-mount unit in IP00 according to the VDE- DIN- and EU- regulations.
Standard analogue regulation electronics.
Power electronics with IGBT-power semiconductors,generous dimensioning.
Characteristics:
*
Battery supply or galvanicisolated direct voltage (Notice advice on page 10 !)
*
Galvanic isolation between
*
Differential command value inputs
*
Speed and torque regulation
*
Static and dynamic current limit
*
Measuringoutputs for speed and current
*
Enable logic, quick stop
*
Temperature control for motor and device
4
auxiliary voltage and regulation electronics
auxiliary voltage and power stage
regulation electronics and power stage
Advertisement
Table of Contents
