Unitek BAMO A1 Manual page 30

BAMO A1, A2 60-500A
UNITEK products have a warranty against defects in material and workmanship for
a period of one year from the date of shipment. All values from the pre- and final quality
control checks are archivied with the devices' serial numbers.
UNITEK does not guarantee the suitability of the device for any specific application.
During the warranty period, UNITEK will, at its option, either repair or replace products
that prove to be defective, this includes guaranteed functional attributes.
UNITEK specifically disclaims the implied warranties or merchantability and fitness for a
particular purpose. For warranty service or repair, this product must be returned to
a service facility designated by UNITEK.
For products returned to UNITEK for warranty service, the Buyer shall prepay shipping
charges to UNITEK and UNITEK shall pay shipping charges to return the product to the
Buyer.
However, the Buyer shall pay all shipping charges, duties, and taxes for products
returned to UNITEK from another country.
The foregoing warranty shall not apply to defects resulting from:
* improper or inadequate repairs effected by the Buyer or a third party,
* non-observance of the manual which is included in the all consignments,
* non-observance of the electrical standards and regulations
* improper maintenance
* acts of nature
All further claims on transformation, diminution and replacement of any kind of damage,
especially damage, which does not affect the UNITEK device, cannot be considered.
Follow-on damage within the machine or system, which may arise due to malfunction or
defect in the device cannot be claimed.
This limitation does not affect the product liability laws as applied in the place of
manufacture (i. e. Germany).
UNITEK reserves the right to change any information included in this MANUAL.
All connection circuitry discribed is meant for general information purposes and is not
mandatory.
The local legal regulations, and those of the Standards Authorities have to be adhered to.
UNITEK does not assume any liability, expressively or inherently, for the information
contained in this MANUAL, for the functioning of the device or its suitability for any
specific application.
All rights are reserved.
Copying, modifying and translations lie outside UNITEK's liability and thus are not
prohibited. UNITEK's products are not authorized for use as critical components in the
life support devices or systems without express written approval.
The onus is on the reader to verifiy that the information here is current.
30
UniTek Industrie Elektronik GmbH, Hans-Paul-Kaysser-Str.1 D-71397 Leutenbach-Nellm. (b.Stuttgart)