Unitek BAMO A1 Manual page 21

5 Adjustment
Actual Value
Function
Input Signal
Input GND
Differential Input >>>
External Supply >>>
command value as current signal
comm.value from external currnet source
external burden resistor for comm. Value
comm.value resistor R-Soll[W] = comm. value voltage/comm. value current
Caution:
do not use comm. value current between 4 and 20mA
With A1x only positve command value
Command value integrator
Linear-integrator
Integration time adjustment with resistor R11 (INT)
BAMO A1, A2 60-500
max.Value
± 10V=
signal- and GND-connection exchangeable
Bridge X1:6 and X1:7, GND connected to X1:7
Connection
X1:4
X1:6
0 up to ± 20mA
0 up to max. ±10V
Resistance (Ohm)
21