Nortel 1000E Maintenance Manual page 146

146 Replacing equipment
Figure 67
Database Restore
4 Select the Connected Signaling Server option from the Select
restore source from drop-down list and click Submit to restore
the NRS database.
Data from the old StandBy database is replaced with data from
the new NRS database.
Monitor the log messages that appear in the browser window.
If additional log analysis is necessary, a generated XML file is
accessible to the user.
Monitor these key logs:
•
Logs indicating that some entries cannot be restored
correctly:
— The particular entry does not exist in the new database,
so the user must check and provision it manually.
•
Messages indicating corruption of the nrsback.tar file:
— The nrsback.tar file is not properly formatted or the
content is not recognizable to the Restoring tool. The
user must check the tar file and possibly regenerate and
upload it again.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 02.07 22 December 2009
Copyright © 2004-2009 Nortel Networks. All Rights Reserved.