Nortel 1000E Maintenance Manual page 140

140 Replacing equipment
Figure 58
NRS type: Standalone Signaling Server
12
Figure 59
Leader Signaling Server configuration
Select the type of NRS that this Signaling Server is to provide.
•
If this Signaling Server is to be the Primary NRS, press <CR>
or enter a.
•
If this Signaling Server is to be the Alternate NRS, enter b.
•
If this Signaling Server is configured as Co-resident and is to
be the Failsafe NRS, enter c.
Refer to Network Routing Service Installation and
Commissioning NN43001-564) for more information on the NRS.
Depending on whether the Signaling Server is configured as
a Leader or a Standalone, either the Leader Signaling Server
configuration screen or the Standalone Signaling Server - NRS
only configuration screen appears.
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 02.07 22 December 2009
Copyright © 2004-2009 Nortel Networks. All Rights Reserved.