4 SAFETY
•
Carefully read this use and maintenance manual before starting, using, performing
maintenance, or any other operation on the equipment.
•
Strictly comply with the warnings contained in the manual, whether they indicate danger or
caution.
•
The operator must meet all the requirements for using this type of machine.
•
Always wear personal protective equipment in compliance with the occupational safety
regulations in force.
•
Before proceeding with the installation, make sure that the area does not feature any
dangerous condition. Make sure no foreign bodies have been left inside or on the machine.
•
Start the machine start-up sequence following the instructions.
•
Do not enter the machine's operating area while the machine is running.
•
Do not introduce your hands or anything else near or inside the equipment live parts.
•
Do not work in dark conditions. Use all the lights available, making sure they are efficient.
•
Do not use the machine when under the influence of medicines or alcohol, as they may
impact your capacity of moving and thinking.
•
Stay concentrated and use caution before carrying out any operation.
•
Always keep the work area clean.
•
Warn the maintenance managers about any malfunction of parts or systems on board the
machine.
•
Do not wear loose clothing, but always accident-prevention clothing.
NOTE (for UL version):
provide branch circuit protection. Branch circuit protection must be provided in
accordance with the National Electrical Code and any additional local codes.
CSA: INTEGRAL SOLID STATE SHORT CIRCUIT PROTECTION DOES NOT
PROVIDE BRANCH CIRCUIT PROTECTION. BRANCH CIRCUIT PROTECTION
MUST BE PROVIDED IN ACCORDANCE WITH THE CANADIAN ELECTRICAL
CODE, PART I.
5
SAFETY PICTOGRAMS
The device is installed on OBL metering pumps. Pay attention to the safety pictograms on the
pumps.
File: UT-5601
Copyright © - OBL Metering pumps - All rights reserved
Integral solid state short circuit protection does not
9