Proper Use - RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual

i
2. Safety instructions
According DIN EN 13659, it is necessary to determine that
the movement conditions for the shutters are maintained
in accordance with EN 12045.
i

2.1 Proper use

Only use the RolloTron Comfort for opening and closing
roller shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable for auto-
mated operation with this device.
Only use original spare parts
from RADEMACHER.
◆ By doing so, you avoid the risk of malfunctions and
damage to your RolloTron Comfort.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the RolloTron Comfort must be under-
taken by authorised customer service personnel.
◆ The displacement must amount to at least 40 mm on
the lower edge in the rolled-out position with a force
of 150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
Operating conditions
◆ Only operate the RolloTron Comfort in dry rooms.
◆ A 230 V / 50 Hz power supply, together with a site-
provided isolating device (fuse, MCB), must be perma-
nently available at the installation location.
◆ An easily accessible 230 V / 50 Hz socket must be avail-
able at the installation site if the enclosed connecting
cable with Euro plug is being used.
◆ The roller shutters must run up and down smoothly
and should not stick.
◆ The mounting surface for the RolloTron Comfort
must be flat.
EN
7