i
13. Initial commissioning with the help of the installation wizard
1.
Set the upper end point.
a)
In order to do so, press
and hold the [ Up ] but-
ton.
b)
The roller shutters travel
up.
c)
Release the [ Up ] button
as soon as the desired
upper end point has
been reached.
d)
Correct the upper end
point, if necessary.
e)
Store the upper end
point.
2.
Set and store the lower
end point.
Repeat points 1.a - 1.e
with the [ Down ] button.
3.
Set and confirm the time.
Pressing the plus or minus
button for an extended
period causes the numbers
to progress more quickly.
4.
Set and confirm the date
(day of the week / month).
5.
Set and confirm the year.
6.
Set and confirm the first
two digits of your Ger-
man postcode [ PLZ ] or
the desired international
time zone.
Additional information is
given on page 54.
EN
+ -
+ -
+ -
+ -
34 = Factory settings
29