i
9.1 Electrical connection
1.
Connect the provided connecting cable to the connecting
terminals of the RolloTron Comfort.
The colour coding is irrelevant for the installation.
A damaged connecting cable may cause a short
circuit.
◆ Pay attention that cables are laid safely.
◆ The connecting cable may not be pinched when screw-
ing on the belt winder as this could lead to damage.
2.
Lay the connecting cable in the cable duct of the RolloTron
Comfort.
3.
Finally, screw on the traction relief mechanism with the
screws provided.
20
WARNING!
WARNING!
Traction
relief
RolloTron Comfort
Cable duct
Traction relief
EN
RolloTron Comfort Plus