Mounting The Rollotron Comfort - RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual

i

11. Mounting the RolloTron Comfort

Mount the RolloTron Comfort as straight as possible, so
that the belt can wind correctly.
Ensure that the RolloTron Comfort sits freely in the belt
box and that it is not in contact with the masonry, other-
wise noise will be generated during operation.
1.
Slide the RolloTron Comfort into the belt box and screw it
tight using the screws provided.
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Slide the enclosed cover plate over the lower mounting
holes.
WARNING! WARNING!
EN
23