RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual page 67

i
19. What to do if... ?
Fault
... the RolloTron Comfort no longer reacts to
manual commands and a temperature icon is shown
on the display?
... the RolloTron Comfort no longer reacts to
automatic commands and an error message [ Er02 ] is
shown on the display?
Possible cause / solution
The maximum running time of the drive has been exceeded,
see page 6.
The motor is too hot. The RolloTron Comfort will be operational again
in approx. 1 hour.
a) The RolloTron Comfort is no longer ready for operation.
Carry out a hardware reset in accordance with page 61.
b) If the error persists after carrying out a hardware reset, dismantle
the RolloTron Comfort and have the device repaired by a
specialist dealer.
EN
67