RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual page 22

i
10. Drawing in and fastening the belt
5.
Continue to feed the belt into the device as shown in the
bottom right sectional diagram and subsequently slide the
belt over the fastening hooks from above.
6.
Re-insert the mains plug into the socket.
7.
Press the Up button until the belt has wound
completely once around the reel.
8.
Pull the belt tight when winding, so that the deflection
roller turns at the same time.
9.
Remove the mains plug again from the socket again.
10.
Finally, place the provided reel compartment cover onto
the reel compartment.
22
Belt
Fastening
hook
EN
Belt
End of belt
Belt path in
RolloTron Comfort