Menu 2 - Configuration Of Opening And Closing Times [ / ] - RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual

15.2 Switching times (opening and closing times) [ / ]; brief description
◆ SENSOR (only for closing times [ ] )
The closing time is controlled by a light sensor in
relation to the level of brightness.
In addition, the measured twilight value is linked to
the previously configured closing time. The config-
ured closing time is interpreted as "latest at xx:xx
hours".

15.2.1 Menu 2 - Configuration of opening and closing times [ / ]

1.
Call up the main menu.
2.
Select and open menu 2 [
Switching times.
3.
Activate and confirm the
switching times.
On = Switching times on
OFF = Switching times off
40
+ -
]
+ -
Example a:
●
– In winter dusk begins, for example, at approx.
17:00 hours.
– The closing time has been set to 20:00 hours.
– Your roller shutters will close at 17:00 hours.
Example b:
●
– In summer dusk begins, for example, at approx.
22:00 hours.
– The closing time has been set to 20:00 hours.
– Your roller shutters will close at 20:00 hours.
4.
Select and confirm a
switching time block.
If the function is not acti-
vated, proceed at point 5.
1 = The switching time
setting is realised with
a switching time
mode.
2 = The switching time
setting is realised
without a switching
time mode.
EN
+ -