Menu 9.2 - End Point Configuration [ ] - RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual
Electronic roller shutter belt winder
Source: rademacher.de
Table of Contents
Advertisement
15.7.2 Menu 9.2 - End point configuration [ ]
Additional information about configuring the
end points
The end points must be configured in order for the roller
shutters to stop at the desired upper and lower positions.
It is imperative that both end points are configured, oth-
erwise malfunctions may occur..
Observe the safety instructions for setting the end points
on page 28.
1.
First move the blinds
manually to the centre
position.
2.
Select and open
menu 9.2 [
] End points.
Setting order
a)
Set the upper end point,
see page 28.
b)
Set the lower end point,
see page 28.
EN
+ -
55
Advertisement
Table of Contents
