Menu 9.4 - Configure Continuous Display Lighting - RADEMACHER RolloTron Comfort 1623 45 19 Translation Of The Original Operating And Assembly Manual
Electronic roller shutter belt winder
Source: rademacher.de
Table of Contents
Advertisement
15.7.4 Menu 9.4 - Configure continuous display lighting
Pressing one of the operating buttons causes the backlight-
ing in the standard display to switch on at full intensity.
Subsequently the brightness gradually fades down to the
configured level.
1.
Select and open menu 9.4
Display lighting.
a)
Configure and confirm
the desired brightness.
0
= Display lighting
for the continu-
ous display is
switched off.
1-3 = Brightness levels
3
= Maximum
brightness
EN
+ -
+ -
> The display light
remains permanently
switched on at the
configured level.
57
Advertisement
Table of Contents
