Hisense HK950 Service Manual page 11

HK950 Service Manual
3.2.4. Mainboard and memory removal and replacement
Step 1: repeat the action of 3.2.3, remove the base front cover and unplug the connection cable on the Mainboard
side;
Step 2: Remove the two fixing screws of the mainframe to remove it from the base as shown in the figure;
Step 3: Remove the two fixing screws of the rear case of the main body and remove it.
Step 4: Remove the hard disk bracket, heat sink, Mainboard screws, remove all kinds of cables on the Mainboard,
Mainboard and memory replacement;