HK800 POS System User’s Manual Catalog I. G ..........UIDE FOR NSTALLATION 1. A ........1 PPLICATION ANGE AND HARACTERISTICS ..........1 PACKAGE NSPECTION 3.U ............ 1 NVIRONMENT 4.S ..........1 YSTEM NSTALLATION 5. C ..........2 OMPONENTS OF MACHINE POS S ......
HK800 POS System User’s Manual I. Guide for Installation 1. Application Range and Characteristics Hisense HK800 series POS: 1. Adopted Intel® technical design with low power consumption and eco-friendly characteristic; 2. Flexible and reliable touch technique makes the operation more humanized and easier.
HK800 POS System User’s Manual 5. Components of POS machine HK800 various parts and function like in the figure 5.1 The solid figure Touch screen Mainframe 5.2 Side elevation Power LED Harddisk LED SWITCH...
HK800 POS System User’s Manual 5.3 Rear end ports indication (The details may have a little difference, the actual distribution subject to your POS) Assembly and Disassembly of POS Simple Indication 6.1 Disassemble the back shell ① Counter-clockwise unscrew the bolts located both sides ②...
Page 6
HK800 POS System User’s Manual 6.3 Disassemble harddisk ① Counter-clockwise unscrew the bolts located both sides; ② Fish up forward the harddisk cable cover; ③ Counter-clockwise unscrew the bolts of the hardisk; ④ Push up a little of the harddisk bracket then pull it ahead and open, disassemble the bracket, pull out the cable.
HK800 POS System User’s Manual II Installation of Operating System and Driver .Installation Method of Operation System Note: HK800 series products support WIN98、 WIN2000、 WINXP VISTA Operating System, not DOS、WIN95 Operating System, some touch screen does not support WIN98 Operating System.
Page 9
HK800 POS System User’s Manual The driver installation is taking Win2000/xp as system platform and to other system is similar. Chipset Driver Installation Drive Route: \ Mainboard\intel 945G\Chipset\INF Install: a. double click “Setup” b. affirm according to the clue on the screen, finally restart. Video Card Driver Installation Drive Route: \Mainboard\intel 945G\VGA\Win2KXP Install:...
Page 10
HK800 POS System User’s Manual Here the clue shows the driver type (default is USB Driver), click “Next”button until the installation finished. Multimonitor Touch The installation steps are like “b. single screen touch” Fig 1, select “Install multimonitor tool” like Fig 2.
Page 11
HK800 POS System User’s Manual Click “Next”until the installation finished. b. Touch Screen Calibration Double click desktop icon , enter into touch screen setting interface, like Fig 3...
Page 12
HK800 POS System User’s Manual Click button, enter into 4 points calibration interface, according to the clue, click the center of the figure until the ring color turns into yellow , click 4 points in turn then click button and quit, the calibration is finished.
HK800 POS System User’s Manual III. Installation of Peripherals The following peripherals belong to options. 1. Printer and Cash Drawer Installation of Printer and Cash Drawer LPT to mainframe Connect to Connect to printer adapter cash drawer Printer and Cash Drawer Program Instruction To program the printer: according to the instruction ‘\program instruction\printer’...
HK800 POS System User’s Manual 2.2 Customer Display Program Instruction program Customer Display: according instruction ‘\program instruction\customer display’ in the CD affiliated to the equipment, calling customer display DLL or program the driver according to the instance program 3. Keyboard 3.1 Keyboard connection: connect it to the PS/2 keyboard port in the mainframe.
HK800 POS System User’s Manual System Test 1. System Setting The working voltage of customer display is 12V, the nine-pin voltage of COM3 has been set to 12V when leaving factory according to the type of customer display. The setting of each key-press is set by software personal according to the request of POS programming.
Page 16
HK800 POS System User’s Manual Click ‘File→New’, set new menu:...
Page 17
HK800 POS System User’s Manual Normal menu instruction: Printer type setting of printer type Printer port setting of printer port Customer display type setting of customer display type Customer display port setting of customer display port Main board type indicating the type of main board Setting the peripheral type and port according to your equipment, tick before the ‘printer connect to the cash drawer’...
Page 18
HK800 POS System User’s Manual (2)To inspect the peripherals, please select ‘check’ menu, the item is as following: Customer display to inspect the customer display, before that, the port and type should has been Printer to inspect the printer, before that, the port and type should has been set Main board cash drawer to check the connection between main board and cash drawer...