Hisense HK950 Service Manual page 10

HK950 Service Manual
3.2 machine disassemble and replacement steps
3.2.1.MSR removal and replacement
Step 1: Remove the card reader USB cable and the fixed card under pressure;
Step 2: According to the direction of construction plans to promote the magnetic card reader to remove it for
replacement;
3.2.2. Hard disk removal and replacement
Step 1: Press both sides of the hard disk with plastic fixing bracket and pull the bracket in the direction of the arrow
to remove the hard disk.
Step2: Remove the hard disk from its mounting bracket and replace it;
3.2.3. second screen LCD disassembly and replacement
Step 1: Dial the lock to " " as shown, remove the front bezel as the picture shows;
Step 2: Remove the second screen from the base by removing the three screws on the second screen mounting
bracket (base end) and the two fixing screws on the pressboard.
Step 3: Remove the second screen of the four screws (monitor side) after the second screen to be replaced;