Table of Contents
Advertisement
7.4
OSCILLATION SPEED AND COVERAGE
Oscillation Speed: The chart shows how many times per minute the oscillator
makes one complete cycle as a function of flow. The higher the flow, the faster
it oscillates.
Nozzle Reach: Refer to the operation manual for the specific nozzle. For
reach with oscillation, subtract 20% from the distance.
61m
53m
45m
38m
30m
22m
15m
8.0
STORAGE
The monitor may be stored pre-connected to its hose on the optional storage bracket, TFT part number XXL-B. The storage bracket may
be mounted on a horizontal surface, or a vertical surface with the nozzle end pointing down or sideways.
To mount the bracket, follow the instructions (LIX-735) provided with the bracket kit.
WARNING
©Copyright Task Force Tips LLC 2006-2021
WIDTH OF COVERAGE
200
175
150
125
100
75
50
0
The type of nozzle and flow pressure are critical to the coverage area. The graph shows coverage
area based on the movement capability of the oscillating mechanism. Actual coverage will depend
on flow, pressure, type of nozzle, angle of fog pattern, and wind conditions.
The Portable Monitor Storage Bracket is designed only to store the Portable Monitor. Attempting to
flow from the storage bracket can cause the monitor to become dislodged from the bracket and out
of control, causing severe injury or death. Always properly deploy the monitor before flowing.
150 / 45m
125 / 38m
100 / 30m
75 / 23m
50 / 15m
OF BlitzForce OSCILLATING UNIT
Figure 7.4
13
APPROXIMATE
GPM
CYCLES/MIN
8
175
13
250
21
375
28
500
BlitzForce OSCILLATION SPEED
Table 7.4
20 DEGREES
30 DEGREES
40 DEGREES
COVERAGE AREA
LIX-730 February 3, 2021 Rev09
L/MIN
650
1000
1500
2000
Advertisement
Table of Contents
Need help?
Do you have a question about the BlitzForce Portable Monitor and is the answer not in the manual?
Questions and answers