Creo Color Controller C-80 Technical Manual page 99

The missing disk volume is deleted.
3. Right-click the Missing Dynamic area, and select Remove Disk.
The missing disk is deleted.
4. Proceed to Creating a Striped Volume.
Creating a Striped Volume
After you have replaced a disk, or low-level formatted one or more disks, you need
to create a striped volume.
1. In the Computer Management window, right-click the white area to the right of
the disk for which you need to create a volume, and select New Volume.
2. In the New Volume Wizard, click Next.
3. Select Striped, and click Next.
83