Configuration Wizard (First-Time Software Setup); Choosing The Configuration Type - Creo Color Controller C-80 Technical Manual

2.2

Configuration Wizard (First-time Software Setup)

2.2.1 Choosing the Configuration Type

4. If a power failure occurs while the server is turned on, the server will restart
automatically when power is restored.
To turn off the Color Controller C-80:
Perform an orderly shutdown of the operating system before turning off the server.
1. Press the power control button to turn off the server.
2. Disconnect the AC power cable from the AC mains supply.
WARNING: Pressing off only the power control button will leave some
circuits energized. For complete disconnection from the supply, the main AC
power cable must also be disconnected from the AC mains power.
After turning on the Color Controller C-80 for the first time the Configuration Wizard
appears.
The first-time software setup is performed using the Configuration Wizard.
Note: During the configuration process, when prompted to restart your computer,
No
click . At the end of the Configuration Wizard, you will be prompted to restart
your system.
 Verify that First Time Configuration is selected, and click Next.
11