Creo Color Controller C-80 Technical Manual page 56

40 Chapter 3—Reinstalling the Color Controller C-80 Software
1. If the Color Controller C-80 is on and the Color Controller C-80 workspace is
open:
a. Exit the workspace.
b. Place DVD 1 (Fast Install) into the DVD-RW drive.
c. From the Windows Start menu, select Shut Down > Restart > OK . Wait until
the Color Server Startup menu appears and then proceed to step 2.
If your Color Controller C-80 is off:
a. Press the Power On/Off button on the front panel.
b. As soon as power is applied, place DVD 1 (Fast Install), into the DVD-RW
drive.
c. Wait until the Color Server Startup menu appears.
2. When the Color Server Startup menu appears, the following options are
available:
•
Complete Installation, deleting old jobs
•
Preservation Installation (System Partition Overwrite)
•
System Backup Tool
•
Exit
3. On the keyboard, press the number of the option you want to perform:
•
Press 1 to perform a complete installation
•
Press 2 to perform preservation installation
The confirmation message Are you sure? appears.
4. Press y (Yes) to confirm your selection.
Note: To return to the
5. The system starts copying the files. This process takes about ten minutes, and
then the following message appears:
Please remove any media from the DVD-RW drive and press
Ctrl+Alt+Del to reboot the computer.
6. Remove DVD 1 from the DVD-RW drive, and press
restart.
7. In the Computer Name and Administrator Password screen, type the name for
the Color Controller C-80—for example, C80_WinXP .
Important:
Administrator Name and Password
In the
If required, you can change the administrator name and password, but only at
the end of the installation process. See Configuring Security Settings on
page 18.
8. Click Next.
The installation process continues.
9. At the end of the installation the system restarts.
ColorServer Startup
menu, click
area, use the default settings.
(No).
N
+ + to
CTRL ALT DELETE