Color Controller C-80 Does Not Turn On - Creo Color Controller C-80 Technical Manual

68

4.4.1 Color Controller C-80 Does Not Turn On

Symptom Recovery Action
Color Controller C- Verify that:
80 does not turn on.
•
•
•
•
•
Then:
1. Turn the power on and off to test the system.
2. The battery on your system board may be old. Verify
3. If you just installed an option, remove it and restart
4. Review General Power Checkout on page 73.
5. If the problem remains, escalate the service call.
Chapter 4—Diagnostics and Troubleshooting
The power cables are properly connected to the Color
Controller C-80
The electrical outlet functions properly
The power-on LED is illuminated
There are no short circuits between the system board
and the chassis
The memory DIMMs are correctly seated
that it still supplies ~3 volts DC; if not, replace the
battery.
the Color Controller C-80. If it turns on, you might
have installed more options than the power supply
supports.