Creo Color Controller C-80 Technical Manual page 31

2. In the Internet Protocol (TCP/IP) Properties dialog box, select Use the
following IP address.
3. In their corresponding boxes, type the new IP address, Subnet mask, and
Default gateway (if applicable).
4. Click OK.
Note: When prompted to restart your
will be prompted at the end of the Configuration Wizard to restart the server.
5. In the Local Area Connection Properties dialog box, click OK.
Configuring the IPv6 Address
1. In the IPv6 Address area, verify that the address is correct.
2. If it is correct, proceed to Configuring the AppleTalk Zone.
Color Controller C-80
, click
15
No
. You