Safety Precautions; General Safety; Battery Replacement; Static Electricity - Creo Color Controller C-80 Technical Manual

vi

Safety Precautions

General Safety

Battery Replacement

Static Electricity

The following safety information includes instructions about avoiding personal injury,
before and while servicing the Color Controller C-80.
Follow these rules to ensure general safety:
•
Lift up the Color Controller C-80 using the handle and not using the front panel.
Lifting it up using the front panel may result in major injury.
•
Before opening the Color Controller C-80 covers, ensure that the unit has been
switched off.
Pressing the ON/OFF power button will leave some circuits energized. For
complete disconnection from the supply, the main power cable must also be
disconnected from the power source.
•
Only qualified service personnel should replace the battery.
•
Handle and dispose of the used batteries according to Lithium battery
manufacturer's instructions.
When handling static-sensitive electrical devices (such as: electronic boards, disk
drives, or memory modules):
•
Use a field service grounding kit (chain, mat, and wrist strap).
•
After removing the component from the system or from its protective wrapper,
place it on a grounded anti-static mat and not on a carpet, or on any other
unshielded surface.
•
After removing a board from a station, store it in an anti-static bag.
Safety Information (Multi-Language)