Creo Color Controller C-80 Technical Manual page 81

Shortcut Buttons
The shortcut buttons are found beneath the main menu bar and are available for
performing the main operations when running diagnostics tests.
Initiates the Run command to perform a diagnostic test
running in loop or executing batch of tests.
Terminates a test running in loop or executing batch of
tests. This button appears only after the Run button was
selected.
Appears after the Stop button is selected or until the current
test is completed.
Activates the Errors command and accesses the Error
Buffer for all tests run or a Quick Batch. The contents of this
buffer are recorded in an HTML file which appears through
the HTML browser.
Enables quick access to the Error Buffer of a selected test.
The contents of this buffer are recorded in an HTML file
which appears through the HTML browser.
Executes the Loop Until Abort command, which toggles the
test sequence to Loop On. Loop Off is the default setting
when executing diagnostic tests.
Toggles the test sequence to Loop Off.
Quits the diagnostics software. Remember to stop any tests
that are running before exiting.
Selects specific menu options or tree nodes when help is
required.
Monitoring
The monitoring area is beneath the shortcut buttons. It displays three levels of
monitoring progress:
Current Test Shows the progress of the specific test be performed.
Test Progress Shows the progress of component tests of a batch run.
Batch Shows the progress of the entire batch being run.
Progress
65