Preface - Siemens Simatic ET 200SP Equipment Manual

Preface

Preface
Purpose of the documentation
This device manual complements the system manual ET 200SP distributed I/O system.
General functions of the ET 200SP are described in the ET 200SP Distributed I/O System
system manual (http://support.automation.siemens.com/WW/view/en/58649293).
The information provided in this device manual and the system manual enables you to
commission the ET 200SP distributed I/O system.
The information in this manual and the system/function manuals provide support when you
commission the system.
A description of the F-system SIMATIC Safety can be found in the SIMATIC Safety –
Configuring and Programming programming and operating manual
(https://support.industry.siemens.com/cs/ww/en/view/54110126).
Conventions
CPU: When the term "CPU" is used hereafter, it refers to the fail-safe CPUs of the S7-
1200/1500 automation system, prior generation S7-300/S7-400 automation systems, and ET
200 CPUs.
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software STEP 7 (TIA Portal).
Please observe notes marked as follows:
Note
A note includes important information on the product described in the documentation, on
handling the product, or on the part of the documentation to which you ought to pay special
attention.
ET 200SP F-TM Count 1x1Vpp sin/cos HF (6ES7136-6CB00-0CA0)
Equipment Manual, V1.0, 01/2021, A5E47073911-AA
3