Siemens Simatic ET 200SP Equipment Manual page 29

Wiring using the cable is shown in the following figure:
NOTICE
The right side of the F-TM Count module may exhibit some sensitivity to electrostatic
discharge (ESD).
Care should be taken to avoid exposure to ESD. If possible, it is recommended the F-TM
Count module is not the last module on the right of the mounted configuration.
ET 200SP F-TM Count 1x1Vpp sin/cos HF (6ES7136-6CB00-0CA0)
Equipment Manual, V1.0, 01/2021, A5E47073911-AA
Connecting
3.1 Wiring and block diagram
27