Intellian i4 Inland Installation And Operation User Manual page 35

Setting the LNB Local Frequency
It is possible to select a local frequency from ACU. It is not recommended
for a novice satellite service user to use this mode.
Case1. Single band LNB is used.
SETUP MODE ?
YES NO
SET SAT PAIR ?
PREV YES NEXT
X4
SET LOCAL FREQ ?
PREV YES NEXT
1. Press YES to enter setup mode.
2. Press NEXT four times to enter set local
frequency mode.
3. Press YES to set local frequency.
4. Select the LNB Type* - SINGLE.
LNB TYPE : SINGLE
PREV SELECT NEXT
5. Input the local frequency of LNB.
LOCAL FREQ: #####MHz
- INPUT +
6. Press YES to accept the data.
SAVE ?
YES NO
PREV - Shows previous LNB type.
SELECT - Set the displayed LNB type.
NEXT - Shows next LNB type.
Press ENTER to move to next screen.
+ increases the value. - decreases the value.
Change the underscored digit using the
+/-buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
Press NO to cancel and return to main setup
mode.
35