Product Profile; Introduction - dji FPV User Manual

Product Profile

Introduction

DJI FPV consists of an aircraft, goggles, and remote controller, which all feature DJI's O3 technology that provides
video transmission with a maximum transmission range of 6 mi (10 km), bit rate of up to 50 Mbps, and minimum
end-to-end latency within 28 ms. DJI FPV works at both 2.4 and 5.8 GHz and is capable of selecting the best
transmission channel automatically. The enhanced anti-interference ability greatly improves the smoothness and
stability of the video transmission, providing an integrated and immersive flight experience.
Featuring a Forward and Downward Vision System and Infrared Sensing System, the aircraft can hover and fly
indoors as well as outdoors and automatically initiate Return to Home (RTH). With a gimbal and 1/2.3" sensor
camera, the aircraft stably shoots 4K 60fps ultra-HD video and 4K photos. The aircraft has a maximum flight
speed of 87 mph (140 kph) and a maximum flight time of approximately 20 minutes.
The DJI FPV Goggles V2 are equipped with a high-performance display and support 810p 120fps HD display and
real-time audio transmission. By receiving the video signal from the aircraft, users can enjoy a first-person view of
their aerial experience in real time. The goggles have a maximum runtime of approximately 1 hour and 50 minutes
when used with DJI FPV Goggles Battery and where the ambient temperature is 25° C and the screen brightness
is set to 6.
The DJI FPV Remote Controller 2 is equipped with a range of function buttons, which can be used to control the
aircraft and operate the camera. The maximum runtime of the remote controller is approximately 9 hours.
The remote controller reaches its maximum transmission distance (FCC) in a wide-open area with no
electromagnetic interference when the aircraft is at an altitude of approximately 400 ft (120 m). The
maximum transmission distance refers to the maximum distance that the aircraft can still send and
receive transmissions. It does not refer to the maximum distance the aircraft can fly in a single flight.
The end-to-end latency is the total time from camera sensor input to screen display. The DJI FPV
can reach its minimum latency in Low Latency mode (810p 120fps) in a wide open area with no
electromagnetic interference.
Maximum flight time was tested in an environment with no wind while flying at a consistent 24.9 mph
(40 kph) and the maximum flight speed was tested in Manual mode at sea level altitude with no wind.
These values are for reference only. The maximum flight speed of the aircraft varies depending on
national and regional regulations.
6
© 2021 DJI All Rights Reserved.
Goggles
Aircraft
Remote Controller